Typical Deliverables

1. Detail engineering

  • Preliminary P&ID.
  • Sizing of equipment / sub systems.
  • General arrangement drawing for all equipment.
  • In addition to above ACE adapts the plant design as offered by equipment supplier and make it good for existing site in active cooperation with equipment supplier.
  • Documentation review of equipment supplied and adapting the same for site.

3. Electrical and Instrumentation

  • Preparation of SLD for the electrical system
  • Specs for substation electrical – new or up-gradation of equipment
  • PCC, MCC & PMCC sizing and specs
  • Cable sizing and specs - power and control..
  • Cable routing (Power & instrumentation)
  • Cable – BOQ (Power & Instrumentation)
  • Review of vendor technical quote and finalization of PO specs
  • Plant lighting details

2. Utilities

  • Detailed specifications Capacity
  • P & ID for – Compressed air and CT water, chilled water
  • Layout - Plan / Elevation
  • Detailed piping drawing , route, support
  • Bill of materials

4. Project Management

  • To receive, circulate and get comments / approval of detail engg documents prepared from KIL and incorporate the same.
  • To prepare purchase order specifications after floating enquiries and negotiating with vendors for all bought items including electricals / instrumentation with laid down specifications and purchase procedure.
  • To inspect and collate documentation for all bought out equipment at vendor’s site where required.
  • To supervise unloading, testing and safe keeping of such items.
  • To take complete charge and assume overall responsibility of erection, pre-commissioning trials and assistance in debugging of this project, if required.
  • To ensure smooth execution of this project within budget and time
*( subject to location)
Our main business courses

Right here we've got something you gonna love

Cable Compounding

01. Sioplas
02. Peroxide
Read More

Engineering Plastics

Detail engineering covering storage,
Raw material handling, Read More

Master Batch

01. Black 02. White
03. Colour including fibre grade Read More


Exposure to tooling,
water recycling for chilled water
Read More

1.Cable compounding

  1. Sioplas
  2. Peroxide

We have engineered following plants:

  • Sioplas - up to 11 KV covering Raw material handling to packaging
  • Peroxide –
    • Injection mode
    • Soaking mode.
    • Covered adoption of plant to current building.
    • Raw material to finished good handling
    • Clean room where required


  1. Black
  2. White
  3. Colour including fibre grade

Detail engineering covering storage, raw material handling, mixing, feeding (premix or split feed mode) extrusion, homogenising and packing Have visited many European plants

3.Engineering plastics

  1. From raw material handling from various packings like big bag, octabins and small bags covering mineral, glass, polymer additives.
  2. Various post extrusion process like screening, drying, Dedusting and packing
  3. Have worked for MNC
  4. Had an opportunity to visit European and Korean plant of MNC

Detail engineering covering storage, raw material handling, mixing, feeding (premix or split feed mode) extrusion, homogenising and packing Have visited many European plants

4.PVC - for PVC flex and rigid

Have worked with British company for their Indian counterpart. Exposure to tooling, water recycling for chilled water and like auxiliaries

Our Clients

Who We Are? Meet Our Team!

ACE ,was started by Kaushik Naik, ME (Prod), GDMM, DBM, Chartered Engineer) in 1994. We are group of professionally qualified engineers with more than 9 decades of cumulative experience in industry .We have worked in senior positions in MNCs. We are into providing engineering services and automation solutions for polymer compounding industry and paper industry for the last 12 years.

Mr. Kaushik Naik

(chief coordinator)

Mr. Kaushikkumar Dhirajlal Naik, holding Masters Degree in Production Engineering, trained in Europe. Responsible for developing diagnostic tools and analysis of measurement.

Read More

Mr. Bharatkumar Patel

(ITI Trade)

Mr. Bharatkumar Dahyabhai Patel, Trained in Europe. Have worked with Europeans and Americans on critical gear box (up to 5000 HP). Expert on laser alignment and motors.

Read More

Mr. Nitant Vyas

(BE (Mechenical))

Mr. Nitant Vyas, holding bachelors degree in Mechanical Engineering, trained in Europe for twin screw extruder, motors and gearbox. Has 5.5 years of experience of working in Larsen and Toubro Heavy Engineering. Handles independently under active guidance of Kaushik Naik & Bharat Patel varied systems, trouble shooting, diagnostic services.

Mr. Ankit Fruitwala

(Project Engineer)

Mr. Ankit Fruitwala, Trained in Europe for PLC, VFD and related hardware. Handles independently varied system and trouble shooting. Exposure to multiple make PLC/ VFDs.

Read More

Get in touch with us

  • Contacts

  • 1523/1, Survey No.343, Plot No.A-12,
    Balda Industrial Park, Balda, Taluka - Pardi, Dist:-Valsad, Gujarat - 396125 India
    Email: info@acepolytech.com
    Phone: +912632250660
  • Previously at

  • 21, Saibaba Park, New Civil Road, Valsad - 396001 India
    Email: info@acepolytech.com
    Phone: +912632250660

Copyright © 2015